Figure 4-22: Diag - Analog Output Calibration Mode - Single Analog Channel - Teledyne T100 Instruction Manual

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
DIAG ANALOG I / O CONFIGURATION
PREV NEXT
DIAG AIO AOUTS CALIBRATED: NO
< SET> CAL
DIAG AIO CONC_OUT_2:5V, CAL
< SET SET> EDIT
DIAG AIO CONC_OUT_2 RANGE: 5V
SET> EDIT
DIAG AIO CONC_OUT_2 REC OFS: 0 mV
< SET SET> EDIT
DIAG AIO CONC_OUT_2 AUTO CAL: ON
< SET SET> EDIT
Figure 4-22:
To automatically calibrate a single analog channel from the DIAG Menu (refer to Figure
4-17), press:
ENTR EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
DIAG – Analog Output Calibration Mode – Single Analog Channel
EXIT to Return
to the main
Sample Display
Press SET> to select the
Analog Output channel to
be configured. Then Press
EDIT to continue
DIAG AIO CONC_OUT_2 CALIBRATED: NO
<SET CAL
DIAG AIO AUTO CALIBRATING CONC_OUT_2
DIAG AIO CONC_OUT_2 CALIBRATED:
<SET CAL
Operating Instructions
EXIT
YES
EXIT
109