Figure 5-5: Comm – Change Hostname - Teledyne T100 Instruction Manual

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
5.1.2.3. CHANGING THE ANALYZER'S HOSTNAME
COMMUNICATIONS MENU
SETUP X.X
ID INET COM1
SAMPLE ENTER SETUP PASS : 818
8 1 8
Continue pressing SET> UNTIL ...
Button
<CH
CH>
INS
DEL
[?]
ENTR
EXIT
Buttons only appear when applicable.
The HOSTNAME is the name by which the analyzer appears on your network. The
default name for all Teledyne ML's T100 analyzers is T100. To change this name
(particularly if you have more than one T100 analyzer on your network), access the
COMM Menu (refer to Figure 5-1), then press:
EXIT
Table 5-3) to edit HOSTNAME
ENTR EXIT
SETUP X.X INITIALIZATI0N SUCCEEDED
SETUP X.X
ID
Figure 5-5: COMM – Change Hostname
Table 5-3: Hostname Editing Button Functions
Moves the cursor one character to the left.
Moves the cursor one character to the right.
Inserts a character before the cursor location.
Deletes a character at the cursor location.
Press this button to cycle through the range of numerals and
characters available for insertion. 0-9, A-Z, space ' ~ !  # $ % ^ & * ( )
- _ = +[ ] { } < >\ | ; : , . / ?
Accepts the new setting and returns to the previous menu.
Ignores the new setting and returns to the previous menu.
Remote Operation & Advanced Features
HOSTNAME: T100
SETUP X.X
<SET EDIT
HOSTNAME: T100
SETUP X.X
<CH CH> INS DEL [?]
Use these buttons (See
HOSTNAME: T100-FIELD1
SETUP X.X
<SET EDIT
SETUP X.X INITIALIZING INET
...
INITIALIZING INET 100%
SETUP X.X
COMMUNICATIONS MENU
INET COM1
Function
EXIT
ENTR EXIT
EXIT
0%
INITIALIZATION FAILED
Contact your IT Network
Administrator
EXIT
131