Setup - Cfg: Viewing The Analyzer's Configuration Information; Figure 4-6: Setup - Configuration Information - Teledyne T100 Instruction Manual

Operating Instructions
4.5. SETUP – CFG: VIEWING THE ANALYZER'S CONFIGURATION
INFORMATION
Press NEXT of PREV to move back
and forth through the following list
of Configuration information:
 MODEL NAME
 SERIAL NUMBER
 SOFTWARE REVISION
 LIBRARY REVISION
 iCHIP SOFTWARE REVISION

HESSEN PROTOCOL REVISION

ACTIVE SPECIAL SOFTWARE
1
OPTIONS
 CPU TYPE
 DATE FACTORY CONFIGURATION
SAVED
1
Only appears if relevant option of Feature is active.
88
Pressing the CFG button displays the instrument configuration information. This display
lists the analyzer model, serial number, firmware revision, software library revision,
CPU type and other information. Use this information to identify the software and
hardware when contacting customer service. Special instrument or software features or
installed options may also be listed here.
SAMPLE
< TST TST > CAL
SAMPLE
8
SAMPLE
CFG DAS RNGE PASS CLK MORE
1
1
SAMPLE
NEXT
Figure 4-6: SETUP – Configuration Information
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
RANGE = 500.000 PPB
ENTER SETUP PASS : 818
1 8
PRIMARY SETUP MENU
T100 SO2 ANALYZER
PREV
SO2 =XXX.X
SETUP
ENTR EXIT
Press EXIT at
any time to
return to the
EXIT
SAMPLE display
Press EXIT at
any time to
return to
EXIT
SETUP menu