Teledyne T100 Instruction Manual page 146

Remote Operation & Advanced Features
SETUP X.X 0) PARAM=CONC1, MODE=AVG
PREV NEXT INS DEL EDIT
SETUP X.X PARAMETERS:CONC1
SET> EDIT
SETUP X.X SAMPLE MODE:AVG
<SET SET> EDIT
SETUP X.X PRECISION: 1
<SET SET> EDIT
SETUP X.X STORE NUM. SAMPLES: OFF
<SET EDIT
Figure 5-15:
146
To configure the parameters for a specific data parameter, follow the instructions as
shown in Figure 5-14, then press:
EXIT
EXIT
SETUP X.X PARAMETERS: CONC1
PREV NEXT
Cycle through list of available
EXIT
SETUP X.X SAMPLE MODE: AVG
INST AVG SDEV MIN MAX
Press the key for the desired mode
EXIT
SETUP X.X PRECISION: 1
1
Set for 0-4
EXIT
SETUP X.X STORE NUM. SAMPLES: OFF
OFF
Turn ON or OFF
DAS – Configuring Parameters for a Specific Data Parameter
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
ENTR EXIT
Parameters.
ENTR EXIT
ENTR EXIT
ENTR EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
<SET Returns to
previous
Functions