Table of Contents
Advertisement
Getting Started
3.7.2. CALIBRATION PROCEDURE FOR THE O
3.7.3. CALIBRATION PROCEDURE FOR THE CO
IMPORTANT
76
If your analyzer is equipped with the optional O
during installation of the instrument. Refer to Section 6.10.1 for instructions.
If your analyzer is equipped with the optional CO
calibrated during installation of the instrument. Refer to Section 6.10.2 for instructions.
Once you have completed the above set-up procedures, please fill out the Quality
Questionnaire that was shipped with your unit and return it to Teledyne ML.
information is vital to our efforts in continuously improving our service and our
products. THANK YOU.
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
OPTION
2
sensor, this sensor should be calibrated
2
OPTION
2
sensor, this sensor should be
2
This
Advertisement
Table of Contents
