Table of Contents
Advertisement
Remote Operation & Advanced Features
5.2.2.7. RS-232 REPORT FUNCTION
Toggle to turn
reporting ON or OFF
5.2.2.8. COMPACT REPORT
5.2.2.9. STARTING DATE
5.2.2.10. DISABLING/ENABLING DATA CHANNELS
150
The M DAS can automatically report data to the communications ports, where they can
be captured with a terminal emulation program or simply viewed by the user.
To enable automatic COMM port reporting, follow the instruction shown in Figure 5-11,
then press:
Edit Data Channel Menu
SETUP X.X
0) CONC:
PREV NEXT
SETUP X.X
NAME:CONC
<SET
SET>
EDIT
Press SET> until...
SETUP X.X
RS-232 REPORT: OFF
<SET
SET>
EDIT
SETUP X.X
RS-232 REPORT: OFF
OFF
DAS – RS-232 Report Function
Figure 5-18:
When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead
of reporting each parameter in one channel on a separate line, up to five parameters are
reported in one line, instead.
This option allows a user to specify a starting date for any given channel in case the user
wants to start data acquisition only after a certain time and date. If the Starting Date is
in the past, the DAS ignores this setting.
Data channels can be temporarily disabled, which can reduce the read/write wear on the
disk-on-module. The ALL_01 channel of the T100, for example, is disabled by default.
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
ATIMER,
2,
4032, R
INS
DEL
EDIT
PRNT
EXIT
PRINT
EXIT
PRINT
EXIT
ENTR
EXIT
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
Advertisement
Table of Contents
