Epa Equivalency Designation - Teledyne T100 Instruction Manual

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
Span Drift (7 days)
Accuracy
Linearity
Temperature Coefficient
Rise and Fall Time
1
As defined by the USEPA
2
Defined as twice the zero noise level by the USEPA

2.2. EPA EQUIVALENCY DESIGNATION

<± 0.1% CO
2
<± (0.02% CO + 2% of reading)
2
<± 0.1% CO
2
<± 0.01% CO /°C
2
<60 seconds to 95%
Table 2-3: CO
2
The T100 Analyzer is designated as Reference Method Number EQSA-0495-100 as per
40 CFR Part 53 when operated under the following conditions:
 Range: Any range from 50 parts per billion (ppb) to 10 parts per million (ppm).
 Ambient temperature range of 5
 Line voltage range of 100-120 VAC or 220-240 VAC, at 50 or 60 Hz.
 Sample filter: Equipped with PTFE filter element in the internal filter assembly.
 Sample flow of 650 +/- 65 cm
 Vacuum pump (internal) capable of 14"Hg Absolute pressure @ 1 slpm or better.
 Software settings:
Dynamic span
Dynamic zero
Dilution factor
AutoCal
Dual range
Auto-range
Temp/Pressure compensation
Under this designation, the analyzer may be operated with or without the following
optional equipment:
 Rack mount with chassis slides.
 Rack mount without slides, ears only.
 Zero/span valve options.
 Internal zero/span (IZS) option with either:
 SO
permeation tube - 0.4ppm at 0.7 liter per minute; certified/uncertified.
2
 SO
permeation tube - 0.8 ppm at 0.7 liter per minute; certified/uncertified.
2
Under the designation, the IZS option cannot be used as the source of
calibration.
Sensor Option Specifications
o o
C to 40
3
/min.
OFF
OFF
OFF
ON or OFF
ON or OFF
ON or OFF
ON
Specifications, Approvals & Compliance
C.
31