Teledyne T100 Instruction Manual page 333

APPENDIX A - Version Specific Software Documentation
SETUP VARIABLE
RS232_MODE
BAUD_RATE
MODEM_INIT
RS232_MODE2
A-16
NUMERIC DEFAULT
UNITS VALUE
BitFlag 0
— 115200
— "AT Y0 &D0
&H0 &I0
S0=2 &B0
&N6 &M0 E0
Q1 &W0"
BitFlag 0
05036 Rev D
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
VALUE RANGE
0–65535 RS-232 COM1 mode flags. Add values
to combine flags.
1 = quiet mode
2 = computer mode
4 = enable security
8 = enable hardware handshaking
16 = enable Hessen protocol
32 = enable multi-drop
64 = enable modem
128 = ignore RS-232 line errors
256 = disable XON / XOFF support
512 = disable hardware FIFOs
1024 = enable RS-485 mode
2048 = even parity, 7 data bits, 1 stop
bit
4096 = enable command prompt
8192 = even parity, 8 data bits, 1 stop
bit
16384 = enable dedicated MODBUS
ASCII protocol
32678 = enable dedicated MODBUS
RTU or TCP protocol
16384 = enable TAI protocol
300, RS-232 COM1 baud rate. Enclose
value in double quotes (") when setting
1200,
from the RS-232 interface.
2400,
4800,
9600,
19200,
38400,
57600,
115200
Any character in RS-232 COM1 modem initialization
the allowed string. Sent verbatim plus carriage
character set. Up to return to modem on power up or
100 characters manually. Enclose value in double
long. quotes (") when setting from the RS-
232 interface.
0–65535 RS-232 COM2 mode flags.
(Same settings as RS232_MODE.)
DESCRIPTION
8
17