Table of Contents
Advertisement
Troubleshooting & Repair
10.
TROUBLESHOOTING & REPAIR
Note
10.1. GENERAL TROUBLESHOOTING
This section contains a variety of methods for identifying and solving performance
problems with the analyzer.
The operations outlined in this section must be performed by qualified
maintenance personnel only.
Some operations need to be carried out with the analyzer open and running.
Exercise caution to avoid electrical shocks and electrostatic or mechanical
damage to the analyzer. Do not drop tools into the analyzer or leave those after
your procedures. Do not shorten or touch electric connections with metallic
tools while operating inside the analyzer. Use common sense when operating
inside a running analyzer.
The front panel of the analyzer is hinged at the bottom and may be opened to gain access
to various components mounted on the panel itself or located near the front of the
instrument (such as the particulate filter).
Remove the locking screw located at the right-hand side of the front panel.
The T100 has been designed so that problems can be rapidly detected, evaluated and
repaired. During operation, it continuously performs diagnostic tests and provides the
ability to evaluate its key operating parameters without disturbing monitoring operations.
CAUTION
WARNING
RISK OF ELECTRICAL SHOCK
259
Advertisement
Table of Contents
