Figure 4-29: Diag - Analog Output - Ain Calibration - Teledyne T100 Instruction Manual

Operating Instructions
4.8.4.6. AIN CALIBRATION
4.8.4.7. ANALOG INPUTS (XIN1...XIN8) OPTION CONFIGURATION

gain (number of units represented by 1 volt)

offset (volts)

engineering units to be represented in volts (each press of the touchscreen button scrolls the
list of alphanumeric characters from A-Z and 0-9)

whether to display the channel in the Test functions
116
This is the sub-menu to conduct the analog input calibration. This calibration should
only be necessary after major repair such as a replacement of CPU, motherboard or
power supplies. Navigate to the ANALOG I/O CONFIGURATION MENU from the
DIAG Menu (refer to Figure 4-17), then press:
DIAG
PREV
DIAG AIO
< SET SET>
DIAG AIO
Instrument
calibrates
automatically
DIAG AIO
< SET SET>
Figure 4-29:
To configure the analyzer' optional analog inputs define for each channel:
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
ANALOG I / O CONFIGURATION
NEXT ENTR
Continue pressing SET> until ...
AIN CALIBRATED: NO
CAL
CALIBRATING A/D ZERO
CALIBRATING A/D SPAN
AIN CALIBRATED: YES
CAL
DIAG – Analog Output – AIN Calibration
Exit at any time to
return to the main
DIAG menu
EXIT
EXIT
Exit to return to the
ANALOG I/O
CONFIGURATION
EXIT
MENU