T100 Documentation - Teledyne T100 Instruction Manual

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
OPTION
OPTION
NUMBER
N/A
N/A

1.4. T100 DOCUMENTATION


APICOM software manual, part number 03945

DAS Manual, part number 02837
ignore calibration, diagnostic, and reset instrument commands. This
feature is of particular use for instruments connected to Multidrop or
Hessen protocol networks.
Call Customer Service for activation.
Second Language Switch activates an alternate set of display
messages in a language other than the instrument's default language.
Call Customer Service for a specially programmed Disk on Module
containing the second language.
Dilution Ratio Option allows the user to compensate for diluted
sample gas, such as in continuous emission monitoring (CEM) where
the quality of gas in a smoke stack is being tested and the sampling
method used to remove the gas from the stack dilutes the gas.
Call Customer Service for activation.
The operation manual (this manual, part number 068070000) for this instrument is
available in either print or in portable document format (PDF) on CD-ROM; the PDF
also can be downloaded from the Internet. To view the PDF Adobe
software is required and can be downloaded from the Internet at http://www.adobe.com/.
Additional documentation for the T100 SO
website at http://www.teledyne-ml.com/manuals/.
DESCRIPTION/NOTES
Analyzer is available from Teledyne ML's
2
Introduction, Features and Options
REFERENCE
N/A
Section 3.7.1.2,
4.6.8 and 9.1.9.3
®
Acrobat Reader
®
27