Table 4-11: Analog Output Current Loop Range - Teledyne T100 Instruction Manual

Operating Instructions
RANGE
0-20 mA
These are the physical limits of the current loop modules, typical applications use 2-20 or 4-20 mA for the lower
and upper limits. Please specify desired range when ordering this option.
The default offset for all ranges is 0 mA.
106
The following DC current output limits apply to the current loop modules:

Table 4-11: Analog Output Current Loop Range

MINIMUM OUTPUT
A1
+ - +
Refer to Figure 3-4 for the location of the analog output connector on the instrument's
rear panel and Table 3-6 for pin assignments.
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
0 mA
ANALOG OUT
A2 A3 A4
- + - +
MAXIMUM OUTPUT
20 mA
-