Test Channel Output; Figure 4-36: Diag - Test Channel Output - Teledyne T100 Instruction Manual

Uv fluorescence so2 analyzer
Hide thumbs Also See for T100:
Table of Contents

Advertisement

Teledyne ML - T100 UV Fluorescence SO2 Analyzer

4.8.10. TEST CHANNEL OUTPUT

When activated, output channel A3 can be used in the standard configuration to report
one of the test functions viewable from the SAMPLE mode display.
To activate the A3 channel and select a test function, access the Signal I/O from the
DIAG Menu (refer to Figure 4-17), then press:
Press PREV or NEXT
to move through the
list of available
parameters
(Table 6-9)
Figure 4-36:
DIAG
SIGNAL I / O
PREV
NEXT
Continue to press NEXT until ...
DIAG
TEST CHAN OUTPUT
PREV
NEXT
DIAG TCHN
TEST CHANNEL: NONE
NEXT
DIAG TCHN
TEST CHANNEL: PMT READING
PREV
NEXT
Press ENTR to
select the displayed
parameter and to
activate the test
channel.
DIAG – Test Channel Output
Operating Instructions
ENTR EXIT
ENTR
EXIT
ENTR
EXIT
ENTR
EXIT
Press EXIT to
return to the
DIAG menu
123

Advertisement

Table of Contents
loading

Table of Contents