Teledyne T100 Instruction Manual page 25

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
OPTION
OPTION
NUMBER
Carrying Strap/Handle
29
Analog Inputs
64
Current Loop Analog
Outputs
41
Parts Kits
42A
43
45
NO Optical Filter
47
Calibration Valves
50A
Internal Zero/Span (IZS) Gas
Generator
51A
DESCRIPTION/NOTES
Side-mounted strap for hand-carrying analyzer
Extends from "flat" position to accommodate hand for carrying.
Recesses to 9mm (3/8") dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
GENERAL SAFETY HAZARD
A fully loaded T100 with valve options weighs about 18 kg (40
pounds).
To avoid personal injury we recommend that two persons lift and
carry the analyzer.
Disconnect all cables and tubing from the analyzer before
carrying it.
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
Also can be used for logging these signals in the analyzer's internal
DAS
Adds isolated, voltage-to-current conversion circuitry to the analyzer's analog
outputs.
Can be configured for any output range between 0 and 20 mA.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
Spare parts and expendables
Expendables Kit includes a recommended set of expendables for
one year of operation of this instrument including replacement sample
particulate filters.
Expendables Kit with IZS includes the items needed to refurbish the
internal zero air scrubber (IZS) that is included.
Spare Parts Kit includes spares parts for one unit.
Recommended for high NOX backgrounds.
Required for EN Certification.
Used to control the flow of calibration gases generated from external sources, rather
than manually switching the rear panel pneumatic connections.
Two Teflon® solenoid valve sets located inside the analyzer:
Zero/Span valve switches between zero air and span gas;
Sample/Cal valve switches between sample gas and calibration gas.
Generates internal zero air and span gas.
Includes heated enclosure for a permeation tube (tube not included –
see SO IZS Permeation Tubes options), an external scrubber for
2
producing zero air and a set of valves for switching between the
sample gas inlet and the output of the zero/span subsystem,
functionally very similar to the valves included in the zero/span valve
option.
Introduction, Features and Options
CAUTION
REFERENCE
N/A
Sections 3.4.2 and
5.2
Sections 3.4.4,
4.6.1, 4.8.4, and
4.8.4.5
Appendix B
Appendix B
Appendix B
N/A
Sections 3.5.3,
3.5.4, 6.4, 6.5 and
6.6
Sections 3.5.4,
6.5, 8.3.2 and
10.6.17
25