Figure 5-19: Diag - Analog I/O Configuration Menu - Teledyne t100 Operation Manual

SETUP Menu
5.9.3.1. ANALOG OUTPUT SIGNAL TYPE AND RANGE SPAN SELECTION
DIAG
PREV
DIAG AIO
< SET
DIAG AIO
< SET SET>
DIAG AIO
DIAG AIO
These buttons set
the signal level
0.1V
and type for the
selected channel
DIAG AIO
0.1V
108
To select an output signal type (DC Voltage or current) and level for one output channel,
activate the ANALOG I/O CONFIGURATION MENU from the DIAG Menu (S),
then press:
ANALOG I / O CONFIGURATION
NEXT
AOUTS CALIBRATED: NO
SET> CAL
CONC_OUT_1:5V,OVR,CAL
EDIT
CONC_OUT_1 RANGE: 5V
SET> EDIT
CONC_OUT_1 RANGE: 5V
1V 5V 10V CURR
CONC_OUT_1 RANGE: 10V
1V 5V 10V CURR
Figure 5-19: DIAG – Analog I/O Configuration Menu
Teledyne API - T100 UV Fluorescence SO
ENTR EXIT
EXIT
EXIT
EXIT
ENTR EXIT
ENTR EXIT
Press SET> to select the
analog output channel to be
configured. Press EDIT to
continue
Pressing ENTR records the new setting
and returns to the previous menu.
Pressing EXIT ignores the new setting and
returns to the previous menu.
06807F DCN7335
Analyzer
2