Table of Contents
Advertisement
Introduction, Features and Options
OPTION
OPTION
NUMBER
SO
IZS Permeation Tubes
2
52C
52H
52M
Communication Cables
60A
60B
60C
60D
Concentration Alarm Relay
61
RS-232 Multidrop
62
Second Gas Sensors
65A
67A
Special Options
N/A
26
DESCRIPTION/NOTES
Replacement tubes for the IZS option; identical size/shape; different effusion rates.
Approximate
Effusion Rate (@ 50°C)
Concentation
796 ng/min
0.3-0.5 ppm
1592 ng/min
0.8 ppm
220 ng/min
150 ppb
Each tube comes with a calibration certificate, traceable to a NIST
standard, specifying its actual effusion rate of that tube to within ± 5%
when immersed in a gas stream moving at the specified flow rate. This
calibration is performed at a tube temperature of 50°C.
For remote serial, network and Internet communication with the analyzer.
Type
Description
Shielded, straight-through DB-9F to DB-25M cable, about
RS-232
1.8 m long. Used to interface with older computers or code
activated switches with DB-25 serial connectors.
Shielded, straight-through DB-9F to DB-9F cable of about
RS-232
1.8 m length.
Patch cable, 2 meters long, used for Internet and LAN
Ethernet
communications.
Cable for direct connection between instrument (rear panel
USB
USB port) and personal computer.
Issues warning when gas concentration exceeds limits set by user.
Four (4) "dry contact" relays on the rear panel of the instrument. This
relay option is different from and in addition to the "Contact Closures"
that come standard on all TML instruments.
Enables communications between host compouter and up to eight analyzers.
Multidrop card seated on the analyzer's CPU card.
Each instrument in the multidrop network requres this card and a
communications cable (Option 60B).
Choice of one additional gas sensor.
Oxygen (O
) Sensor
2
Carbon Dioxide (CO
) Sensor
2
Built in features, software activated
Maintenance Mode Switch, located inside the instrument, places the
analyzer in maintenance mode where it can continue sampling, yet
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
Specified Flow Rate (of
indicated perm tube rate)
0.76 ± 5% lpm
0.76 ± 50% lpm
0.56 ± 25% lpm
REFERENCE
N/A
N/A
N/A
Sections 3.5.4,
6.1.1.3 and 7.1.4
Sections 3.4.8.3,
3.4.8.4, 5.1, 5.1.4,
5.1.5 and 5.2.2.7
Sections 3.4.8.3,
and 3.4.8.4, 5.1,
5.1.4, 5.1.5 and
5.2.2.7
Sections 3.4.8.1
and 5.1.2
Sections 3.4.8.2
and 5.1.2.1
Sections 3.4.7 and
3.7
Section 3.4.8.4
• Section 2.1 (specs)
• Section 3.5.5,
(pneumatic layout)
• Section 6.10.1
(calibration)
• Section 9.2 for
theory of operation
• Section 2.1 (specs)
• Section 3.5.6
(pneumatic layout)
• Section 6.10.2
(calibration)
• Section 9.3 (theory
of operation)
N/A
Advertisement
Table of Contents
