Figure 3-8: Current Loop Option Installed On The Motherboard - Teledyne T100 Instruction Manual

Uv fluorescence so2 analyzer

Hide thumbs Also See for T100:

Table of Contents

Teledyne ML - T100 UV Fluorescence SO2 Analyzer

For current output install the Current Loop option PCA on J19, on J21 or on J23 of the

motherboard.

For voltage output, install jumpers on J19, J21 and/or J23.

Servicing or handling of circuit components requires electrostatic discharge

protection, i.e. ESD grounding straps, mats and containers. Failure to use ESD

protection when working with electronic assemblies will void the instrument

warranty. Refer to Section 0 for more information on preventing ESD damage.

Section 3.4.4.1 provides instructions for converting current loop analog outputs to

standard 0-to-5 VDC outputs.

Figure 3-8: Current Loop Option Installed on the Motherboard

Getting Started