Uv Source Lamp - Teledyne T100 Instruction Manual

Uv fluorescence so2 analyzer
Hide thumbs Also See for T100:
Table of Contents

Advertisement

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
Theory Of Operation
Figure 9-2: UV Light Path

9.1.3. UV SOURCE LAMP

The source of excitation UV light for the T100 is a low pressure zinc-vapor lamp. An
AC voltage heats up and vaporizes zinc contained in the lamp element creating a light-
producing plasma arc. Zinc-vapor lamps are preferred over the more common mercury-
vapor lamps for this application because they produce very strong emission levels at the
wavelength required to convert SO
to SO
*, 213.9 nm (refer to Figure 9-4).
2
2
The lamp used in the T100 is constructed with a vacuum jacket surrounding a double-
bore lamp element (refer to Figure 9-3). The vacuum jacket isolates the plasma arc from
most external temperature fluctuations. The jacket also contains thermal energy created
by the lamp's operation therefore helping the lamp to heat up and maintain proper
vaporization temperature. Light is emitted through a 20 mm x 5 mm portal.
06807A(DCNxxxx)
225

Advertisement

Table of Contents
loading

Table of Contents