Calibration Mode; Calibration Functions - Teledyne T100 Instruction Manual

Operating Instructions

4.3. CALIBRATION MODE

4.3.1. CALIBRATION FUNCTIONS


The CALZ button is used to initiate a calibration of the zero point.

The CALS button is used to calibrate the span point of the analyzer. It is recommended that
this span calibration is performed at 80% of full scale of the analyzer's currently selected
reporting range.

Section 6 details basic calibration and calibration check operations.

Section 7 describes how to perform an EPA protocol calibration.
84
Pressing the CAL button switches the analyzer into calibration mode. In this mode, the
user can calibrate the instrument with the use of calibrated zero or span gases.
If the instrument includes either the zero/span valve option or IZS option, the display
will also include CALZ and CALS buttons. Pressing either of these buttons also puts
the instrument into multipoint calibration mode.
Because of their critical importance and complexity, calibration operations are described
in detail in other sections of the manual:
Teledyne ML - T100 UV Fluorescence SO2 Analyzer