Working with a B axis
12.7 Tool selection for the manual mode
12.7
Tool selection for the manual mode
For the preparatory actions in the manual mode, tool selection and spindle control are both
performed centrally in the T, S, M window.
Figure 12-1
Procedure
See also
Selecting a tool and spindle (Page 94)
530
TSM window for the B and C axis
Aligning the milling and turning tool with β angle:
Press the <SELECT> key and select
0° or
90° or
Value entry box to freely enter the angle.
Aligning the turning tool with γ angle:
Press the <SELECT> key and select
0°
180°
Value entry box to freely enter the angle.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning