Integrating The 3Rw5 Soft Starter Into The Profinet Io System With The Gsdml File - Siemens PROFINET SIRIUS 3RW5 Equipment Manual

Procedure
1. Install the file from the Hardware Support Package (HSP0238).
After installation, you will find the 3RW5 soft starter in the HW Catalog of STEP 7 (TIA Portal).
Note
STEP 7 (TIA Portal) as of V16
3RW5 soft starters, 3RW5 communication modules and 3RW5 HMIs are already contained in
the HW catalog of STEP 7 (TIA Portal) as of V16. Check the 3RW5 topic page for updates and
ensure that your device and the current firmware are contained in the HW catalog.
2. Select the required 3RW5 soft starter from the HW catalog by means of the article number.
3. Add the 3RW5 PROFINET communication module from the HW catalog.
4. Connect the 3RW5 PROFINET communication module of the 3RW5 soft starter to the
PROFINET IO system or the controller.
Result
The 3RW5 soft starter is integrated into the PROFINET IO system as an IO device in STEP 7
(TIA Portal).
You can also integrate the 3RW5 soft starter via the GSDML file in STEP 7 (TIA Portal). (Page 63)
6.2.2.2

Integrating the 3RW5 Soft Starter into the PROFINET IO system with the GSDML file

Requirement
• GSDML file
The current PROFINET GSDML file can be found on the 3RW5 topic page
support.industry.siemens.com/cs/ww/en/view/109747404).
• Configuration software of the controller that supports the schema version of the GSDML file,
e.g. STEP 7
– GSDML files for STEP 7 V5.x
– GSD files for STEP 7 (TIA Portal)
Procedure
1. Install the GSDML file.
After installation, you will find the 3RW5 soft starter in the configuration software of the
controller under "Additional field devices" (e.g. for STEP 7 in the HW Catalog).
2. Select the 3RW5 soft starter in the configuration software of the controller.
3. Insert the 3RW5 soft starter into the PROFINET IO system.
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004
109778885)
109738401)
6.2 Configuring the 3RW5 Soft Starter
(https://support.industry.siemens.com/cs/ww/en/view/
(https://support.industry.siemens.com/cs/ww/en/view/
Configuring
(https://
63