3.5. Cleaning the front panel
3.6 Removing the controller module
Landis & Staefa Division
The front panel can be cleaned with normal washing and rinsing agents or detergents.
It is not resistant to corrosive acids, caustic solutions and abrasive cleaners, or
cleaning with high-pressure cleaners!
The controller module can be removed from the housing for servicing.
The rules of DIN EN 100 015 «Protection of electrostatically sensitive devices »
must be adhered to for internal work on the controller! No liability will be
accepted for damage caused by electrostatic discharge.
7865z09/0200
✱ ✱ ✱ ✱
Press the ribbed surfaces together (at top and bottom) and pull out the controller
module.
CC1B7865E
February 10, 2000
3. Installation
11/56