Default Settings For Manual Mode - Siemens SINUMERIK 840D sl Operating Manual

3.6

Default settings for manual mode

Specify the configurations for manual mode in the "Settings for manual operation" window.
Presettings
Settings
Type of feedrate
Default feedrate G94
Default feedrate G95
Variable increment
Spindle speed
Proceed as follows
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Description
Here, you select the type of feedrate.
G94: Axis feedrate/linear feedrate
•
G95: Rev. feedrate
•
Enter the desired feedrate in mm/min.
Enter the desired feedrate in mm/r.
Enter the desired increment for axis traversal by variable increments.
Enter the desired spindle speed in rpm.
1. Select the "Machine" operating area.
2. Press the <JOG> key.
3. Press the menu forward key and the "Settings" softkey.
The "Settings for manual operation" window is opened.
Working in manual mode
3.6 Default settings for manual mode
89