Power Supply Unit And B/C/T Power Pack Replacement - Ricoh A250 Service Manual

OTHERS
6.7.4 POWER SUPPLY UNIT AND B/C/T POWER PACK
REPLACEMENT
Preparation
1) Remove the left cover.
A250R904.WMF
[C]
A250R902.WMF
1. Remove the exit tray [A] (2 screws).
2. Remove the front cover [B].
3. Remove all connectors.
4. Remove the two bracket holders [C] (5 screws).
5. Remove the power supply unit and B/C/T power pack [D] (3 screws).
NOTE: Both boards are in this assembly. Take out whichever board needs
replacing.
A250
[D]
[C]
[A]
6-38
[B]
A250R903.WMF
SM