Rev. 02/2000
6.4 ROM HISTORY
6.4.1 ROM HISTORY – B305
Description of Modification
Corrections:
⇒
•
The printer controller can now determine if it is
installed in a A250 or B001.
•
If a Postscript driver job is cancelled midway through
the job, the image for the next job was not printed out
correctly.
•
"Waiting..." was displayed when an error occurred but
the machine does not return to normal operating
mode (Ready Status). The next job was not printed
out.
•
If two separate jobs of text less then 256 bytes were
sent from the network, the two jobs were printed out
simultaneously on the same page.
•
It was possible to print out the HDD Directory List
when there was no HDD or PS option installed.
Corrections:
•
The user cannot initiate energy saver mode while in
the middle of a print job.
•
The language displayed is incorrect if any language
other than English has been set.
•
A software error occasionally occurs when the Enter
and Escape keys from the main printer menu display
are pushed simultaneously.
•
After the detection of a paper size mismatch, the error
LED turns off if the selected tray is opened and
closed.
•
If there is no paper remaining in the (selected) bypass
tray when beginning a print job, the correct paper size
is not displayed.
•
When the correct paper is not available to be fed
during a collating job, the corresponding display does
not appear on the screen.
•
Following an R-Jam, the number of copy sets printed
out is incorrect.
•
With PCL5e, three pages of a document are printed
out on one page (images overlapping).
•
Default display for backup mode is changed from
"Compressing" to "Processing".
•
When the tray selected through "tray lock" runs out of
paper, the machine begins feeding paper from
another tray without prompting the user. The pages
are then printed out.
•
Contrary to specifications, it is possible to set a
customized paper size when using the proof print
function.
•
When errors occur with the printer unit, SC error
messages are not displayed.
•
If the Interrupt button is pressed during a print job, the
job does not continue after attempting to resume
printing.
SM
Firmware
Level
B3055280 C
See Note 1
B3055280 B
Continued.....
6-5
ROM HISTORY
Serial
Firmware
Number
Version
Nov. 1999
1.2.7
Prod.
See
Note 2
Oct. 1999
1.2.0
Prod.
A250