Ricoh A250 Service Manual page 793

Rev. 11/2000
Description of Modification
•
Even when the PJL command is released
instructing the machine to exit the paper to tray 2
(1-bin tray), the paper is not output from this tray.
•
With Overlay printing, the text outside the fixed
overlay pattern is printed out as PCL commands
(specifically, the ESC sequence).
•
The paper is not fed from Tray 2, even when the
PJL command is released instructing the machine
to do so.
•
Error message not displayed when an error
occurred during collate mode printing.
•
This new revision disabled the NIB Read/Write
Function.
⇒ •
The printed area was shifted slightly, when "Unit of
Measure" was defined using the macro command.
•
The right edge of the printable area for the raster
image may not print.
•
The right edge for the error Log of the
Configuration Page criss-crossed each other in
Italian and Spanish.
•
The title of "Printer Name (NetWare)" on the
Configuration Page was changed to "Printer
Name".
SM
Firmware
Level
B3055280 E
B3055280 F
B3055280 G
6-7
ROM HISTORY
Serial Firmware
Number Version
March 2000 1.3.4
Production
April 2000 1.3.6
Production
Sept. 2000 1.4.0
Production
A250