Ricoh A250 Service Manual page 465

- An example of the system parameter list (pages 5 and 6) –
* * * SYSTEM PARAMETER LIST (Date and Time) *
And later is information for a design.
REST ENTRY DATA
TMP DIAL:1005 One key:30
Rest Job file:1003(max:1004)
Resouece
Free:0x0FFEFDFF
SAF CAPACITY
100%(Rest block:0x1E00)
Receive
Now status
CCU TX ERROR
* * * SYSTEM PARAMETER LIST (Date and Time) *
Task Status
ID TASK PRI STS
00 idle 20 RDY
01 : :
REST ENTRY DATA
TEMP DIAL: Remaining number of destinations that can be programmed at the
ten-key pad.
One key: Remaining number of destinations that can be programmed as Quick
Dials
Speed key: Remaining number of destinations that can be programmed as Speed
Dials
PRG JOB: Remaining number of keystroke programs that can be programmed
PRG DIAL: Remaining number of destinations that can be used in keystroke
programs.
Rest Job file: Number of remaining job files that can be used.
Rest Dial file: Number of remaining destinations that can be used.
SM
Speed key:1000
Rest Dial file:2002(max:2002)
Bad:0x0000001D CCU:0x00
0x00 OK
ISP START
0x00800A5E 0x00004530
: :
4-3
SERVICE LEVEL FUNCTIONS
* *
1)TTI 1
2)TTI 2
PRG JOB:32 PRG DIAL:2000
[P1|XX|XX|XX|S|p|H]
* *
1)TTI 1
2)TTI 2
SP PC
0x00800A5E 0x00004530
: : :
A891M600.WMF
A250