Ricoh A250 Service Manual page 746

SERVICE PROGRAM MODE
Class Class
1 and 2 3
4
5
1-908*
6
7
⇒
8
A250
Mode No.
Paper Tray Adj.
(S Size Comeback T - 1)
Paper Tray Adj.
(M Size Comeback T - 1)
Paper Tray Adj.
(S Size Ret. Amount - 1)
Paper Tray Adj.
(M Size Ret. Amount - 1)
Paper Tray Adj.
(S Size Setting - 1)
NOTE: The "T" after A4
and LT refer to length-
wise feeding direction.
Function
Optional Paper Tray Unit Only:
Adjusts the upper lift motor forward
rotation time for paper of the same
size as or smaller than the small size
threshold set with SP1-908-8. The
motor rotates forward when the
remaining paper is lower than the
value of SP1-908-6.
See "Option - Paper Tray Unit" for
details on SP1-908.
Optional Paper Tray Unit Only:
Adjusts the upper lift motor forward
rotation time for paper sizes larger
than the small size threshold set with
SP1-908-8, up to and including the
middle size threshold set with
SP1-908-9.
The motor rotates forward when the
remaining paper is lower than the
value of SP1-908-7.
If a middle size threshold is not
stored with SP1-908-9, this SP is not
used (with the default settings, this
SP is not used in this machine).
See "Option - Paper Tray Unit" for
details on SP1-908.
Optional Paper Tray Unit Only:
Selects the remaining paper amount
limit for use with SP1-908-4.
See "Option - Paper Tray Unit" for
details on SP1-908.
Optional Paper Tray Unit Only:
Selects the remaining paper amount
limit for use with SP1-908-5.
With the default settings, this SP is
not used in this machine.
See "Option - Paper Tray Unit" for
details on SP1-908.
Optional Paper Tray Unit Only:
Selects the small size threshold for
the upper tray.
"0" means that this setting is not
used.
The size used by SP1-908 is
determined by paper width. See
"Option - Paper Tray Unit" for details
on SP1-908.
4-8
Rev. 03/2000
Settings
0 ~ 9000
1 ms/step
300 ms
0 ~ 9000
1 ms/step
0 ms
0: Non
(Empty)
1: Near End
2: 25%
3: 75%
0: Non
(Empty)
1: Near End
2: 25%
3: 75%
0: Non
(Not use)
1: HLT/A5
2: A4T
3: LG, LTT
4: DLT, LT
5: A3,A4
SM