Ricoh A250 Service Manual page 860

ROM HISTORY
Description of Modification
•
If a second printing job is selected while the first job is
being printed out (and the first job is then canceled),
the second job is printed out prematurely while
"ready" is being displayed.
•
When a paper mismatch is detected with a job using
various paper sizes, the alarm LED does not shut off.
•
On the config. page, a value is displayed for the size
of the paper inside a tray that has been removed from
the machine.
•
Although not always, there are cases where data
cannot be received when using AXIS.
•
During a sort job, the proper message indicating the
absence of paper is not displayed the second time the
tray runs out of paper (i.e. after the job has been reset
once).
•
Incorrect display of "Wingdings" font.
Initial Production
NOTE 1: This can be viewed at SP Mode 7-801-4.
NOTE 2: This can be viewed on the Printer Configuration page.
A250
Firmware
Level
B3055280 A
6-6
Rev. 12/99
Serial Firmware
Number Version
1st Prod. NA
SM