Ricoh A250 Service Manual page 195

Rev. 03/2000
Mode No.
Class Class
1 and 2 3
1
⇒
5-401*
2
3
5-504*
1
5-507*
2
1
5-508* 2
3
5-801
5-802
5-803
5-804
SM
User Code Mode
(Copier)
User Code Mode (Fax)
User Code Mode
(Printer)
Jam Alarm Setting
Paper/Toner Alarm
(Paper)
Paper/Toner Alarm
(Toner)
CE Call (Jam Level 1)
CE Call (Jam Level 2)
CE Call (Door Open)
Memory All Clear
Free Run
Input Check
Output Check
SERVICE PROGRAM MODE
Function
Selects whether the user code
feature is enabled in copy mode or
not.
If this value is changed, the user tool
setting is also changed.
This SP is for Japan only. Do not
change the value.
If this value is changed, the user tool
setting is also changed.
This SP is for Japan only. Do not
change the value.
If this value is changed, the user tool
setting is also changed.
This SP is for Japan only. Do not
change the value.
This SP is for Japan only. Do not
change the value.
This SP is for Japan only. Do not
change the value.
Resets all software counters. Also,
returns all modes and adjustments to
the default settings.
See the "Memory All Clear" section
for how to use this SP mode
correctly.
Normally, this SP mode should
not be used.
It is used only after replacing the
NVRAM or when the copier
malfunctions due to a damaged
NVRAM.
Performs a free run for both the
scanner and the printer.
After selecting "1", press "OK" or the
! key twice to start this feature.
Press the " (Clear/Stop) key to
stop.
Displays signals received from
sensors and switches.
Press the # (Clear Modes) key to
exit the program. See the "Input
Check" section for details.
Turns on electrical components
individually for test purposes.
See the "Output Check" section for
details.
4-27
Settings
0: No
1: Yes
0: No
1: Yes
A250