Ricoh A250 Service Manual page 666

FIRMWARE HISTORY
4.2 FIRMWARE HISTORY
B307 NIB OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Initial Production Release
Corrects the following:
•
On the web status monitor, the improper
icon was used for "Paper Empty".
•
If the NIB received 5 simultaneous print
jobs, additional print jobs would be lost.
Corrects the following:
•
The firmware was modified to support
A250/B001.
Corrects the following:
•
One banner data page of NetWare was
split into two pages when using NetWare
3.12 pserver mode.
•
In NetWare remote printer mode, the NIB
consumed a server connection license.
To avoid this, the firmware has been
modified to disconnect the NCP
connection immediately after the remote
printer has connected to the server.
Corrects the following:
•
On the web status monitor, the wording
in German was incorrect.
"FreierSpeicher" corrected to "Freier
Speicher".
•
The Web status monitor displays "No
Tray/No Paper" error when a tray is not
closed completely. The message has
been changed to "Other Error".
•
Disabling (Down) or enabling (Up)
AppleTalk protocol from the operation
panel sometimes did not take effect after
the change. To avoid this, the firmware
has been changed to save a new setting
to the NVRAM immediately after a
change.
Corrects the following:
•
When a printer error occurs, the printer
information cannot be accessed using
Macintosh printer utilities such as Apple
Printer Utility.
•
IPP (Internet Print Protocol) function has
been added.
A250
FIRMWARE
LEVEL NUMBER
G6785839B Initial Production
G6785839C February '99
Production
G6785839D March '99
Production
G6785839E
Production
G6785839F
Production
G6785839G
Production
4-2
Rev. 05/2000
SERIAL FIRMWARE
VERSION
3.7.5
3.7.7
3.8.6
April '99 3.8.7
June '99 3.8.8
July '99 3.9.2
SM