Ricoh A250 Service Manual page 141

[A]
A861I152.WMF
[C]
A861I164.WMF
5. Install the two stepped screws [A].
6. Re-install the 1st cassette tray.
7. Install the two brackets [B] (1 screw each).
8. Connect the cable [C] to the copier, as shown.
NOTE: There are cutouts on both sides of the connector. The left side has one
cutout and the right side has two.
9. Re-install the cover removed in step 2 (1 screw).
10. Make a full size copy from the 2nd tray. Then check that the side-to-side
registration is correct. If it is not, adjust the value (SP1-002).
SM
PAPER TRAY UNIT (1 TRAY) INSTALLATION
[B]
3-17
A861I162.WMF
A250