Paper End Sensor Replacement - Ricoh A250 Service Manual

PAPER END SENSOR REPLACEMENT

3.6 PAPER END SENSOR REPLACEMENT
[B]
[A]
1. Remove the paper tray.
2. Remove the paper end sensor bracket [A] (1 screw and 1 connector).
3. Replace the paper end sensor [B].
NOTE: After replacing the sensor, pull the sensor harness to the right side of the
frame [C] so that the harness does not touch the paper in the tray.
3.7 PAPER SIZE SWITCH REPLACEMENT
1. Remove the lower tray cover [A] (2 screws).
2. Remove the paper tray [B].
3. Remove the right front cover [C] (1 screw).
4. Remove the paper size switch bracket [D] (1 screw).
5. Replace the paper size switch [E].
A250
[D]
[E]
[B]
[A]
[C]
A861R106.WMF
A861R101.WMF
10-18
[C]
SM