High Voltage Power Supply Board - Ricoh MD-P2 Field Service Manual

9. PSU [F] ( x 5)
• There are two types of PSUs for this model. Do not install a wrong PSU in the machine.
• PSU has yellow on the transistor is for EU/ASIA models and PSU has white on the transistor is for
NA models.
Fuse
There is the removable fuse on the PSU.
Fuse No.
FU101: NA
FU101: EU, ASIA
• Use a correct rating fuse for the fuse replacement. Never use a wrong rating fuse. If do so, the
machine may be damaged.
• Never try direct connection of PSU circuit without a fuse.

High Voltage Power Supply Board

1. Remove all AIO cartridges.
2. Operation panel (
3. Rear cover ( p.25)
4. Right cover ( p.27)
Rating
15 A, 250V
6.3A, 250V
p.26)
Electrical Components
4
87