Ricoh A250 Service Manual page 173

Mode No.
Class Class
1 and 2 3
Side-to-Side Regist.
(1st Paper Feed)
1
Side-to-Side Regist.
(2nd Paper Feed)
2
1-002*
Side-to-Side Regist.
(3rd Paper Feed)
3
Side-to-Side Regist.
(By-pass Feed)
4
Paper Feed Timing
1 (1st Paper Feed)
Paper Feed Timing
2 (2nd Paper Feed)
1-003*
Paper Feed Timing
3 (3rd Paper Feed)
Paper Feed Timing
4 (By-pass Feed)
By-pass Paper Size
1-007
Display
SM
SERVICE PROGRAM MODE
Function
Adjusts the printing side-to-side
registration from the 1st paper feed
station using the Trimming Area
Pattern (SP5-902, No.10).
Use the key to toggle between +
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the printing side-to-side
registration from the 2nd paper feed
station using the Trimming Area
Pattern (SP5-902, No.10).
Use the key to toggle between +
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the printing side-to-side
registration from the 3rd paper feed
station using the Trimming Area
Pattern (SP5-902, No.10).
Use the key to toggle between +
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the printing side-to-side
registration from the by-pass paper
feed station using the Trimming Area
Pattern (SP5-902, No.10).
Use the key to toggle between +
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the paper feed clutch timing
at registration. The paper feed clutch
timing determines the amount of
paper buckle at registration. (A
larger setting leads to more
buckling.)
Displays the by-pass paper width
sensor output.
4-5
Settings
+9 ~ –9
0.1 mm/step
+0.0 mm
+9 ~ –9
0.1 mm/step
+0.0 mm
+9 ~ –9
0.1 mm/step
+0.0 mm
+9 ~ –9
0.1 mm/step
+0.0 mm
0 ~ 30
1 mm/step
7 mm
0 ~ 30
1 mm/step
8 mm
0 ~ 30
1 mm/step
8 mm
0 ~ 30
1 mm/step
11 mm
A250