Ricoh A250 Service Manual page 468

SERVICE LEVEL FUNCTIONS
4.1.10 RAM DISPLAY AND REWRITE (FUNCTION 06)
1. Enter the fax service mode.
2. Press
3. Press
4. Enter the start address of the RAM area
to be displayed, then press OK.
5. Move the cursor to the target address
using the arrow keys, then enter a new
value (0-9: ten-key pad, A-F: Quick Dial
keys).
6. To scroll through the RAM addresses:
press Prev. or Next.
To jump to an another address: press OK,
and go back to step 3.
7. Exit the service mode.
4.1.11 NCU PARAMETERS (FUNCTION 06)
1. Enter the fax service mode.
2. Press
3. Press
4. Move the cursor to the target parameter
using the arrow keys, then enter a new
value at the ten-key pad.
5. Exit the service mode.
A250 4-6
A233M517.tif
A891M514.tif
A891M515.tif
A233M517.tif
A891M516.tif
SM