Ricoh A250 Service Manual page 790

BULLETIN NUMBER: BULLETIN NUMBER: BULLETIN NUMBER: BULLETIN NUMBER:
APPLICABLE MODEL: : : : APPLICABLE MODEL
APPLICABLE MODEL APPLICABLE MODEL
GESTETNER – 3218/3215S GESTETNER – 3218/3215S GESTETNER – 3218/3215S GESTETNER – 3218/3215S
RICOH – AFICIO 180/150 RICOH – AFICIO 180/150 RICOH – AFICIO 180/150 RICOH – AFICIO 180/150
SAVIN – 9918DP/2015DP SAVIN – 9918DP/2015DP SAVIN – 9918DP/2015DP SAVIN – 9918DP/2015DP
SUBJECT: RIGHT DOOR MODIFICATION
GENERAL:
The Right Door has been modified to prevent the Registration Frame from becoming damaged due to
excessive stress. A cutout was added to the Door near the hinge area so that the stress will be evenly
applied throughout the Cover and not transferred to the Frame. Excessive stress will cause the Cover to
break or detach but the Frame will not be damaged. The following part update is being issued for all
A250/B001 Parts Catalogs.
OLD PART NO. NEW PART NO.
A2501264
UNITS AFFECTED:
All A250/B001 copiers manufactured after the Serial Numbers listed below will have the new style Right Door
installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
   
2000 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN
A250/B001 - 030 A250/B001 - 030 A250/B001 - 030 A250/B001 - 030
A2501279 Right Door
MODEL NAME
Gestetner 3218
Gestetner 3215S
Ricoh AFICIO 180
Ricoh AFICIO 150
Savin 9918DP
Savin 2015DP
DESCRIPTION
SERIAL NUMBER
Not Available
H4300500001
H1700500801
H4300500156
H1700500001
H4300500051
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
10/05/2000 10/05/2000 10/05/2000 10/05/2000
REFERENCE
QTY INT PAGE ITEM
1 1 33 3
CONTROL NO. 058ABW