Ricoh A250 Service Manual page 482

BIT SWITCHES
System Switch 0F
No FUNCTION
0 Country code for functional
to settings (Hex)
7
00: France
01: Germany
02: UK
03: Italy
04: Austria
05: Belgium
06: Denmark
07: Finland
08: Ireland
09: Norway
0A: Sweden
0B: Switz.
0C: Portugal
0D: Holland
0E: Spain
0F: Israel
System Switch 10
No FUNCTION
0 Threshold memory level for
to parallel memory transmission
7
System Switch 11
No FUNCTION
0 TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
1 TSI (G3) or CIL/TID (G4)
printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
2 Not used
3
TTI used for broadcasting
0: The TTIs selected for each
Quick/Speed dial are used
1: The same TTI is used for
all destinations
A250
This country code determines the factory settings
of bit switches and RAM addresses. However, it
has no effect on the NCU parameter settings and
10: Not used
communication parameter RAM addresses.
11: USA
12: Asia
Cross reference
13: Japan
NCU country code: Function 06, parameter C.C.
14: Hong Kong
15: South Africa
16: Australia
17: New Zealand
18: Singapore
19: Malaysia
1A: China
1B: Taiwan
20: Turkey
21: Greece
Threshold = N x 128 kbytes + 256 kbytes
N can be between 00 - FF(H)
Default setting: 02(H) = 512 kbytes
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
Change this bit to 1 if the TSI (G3) or CIL/TID
(G4) overprints information that the customer
considers to be important.
G4: Europe model only
Do not change the factory settings.
1: The TTI (TTI_1 or TTI_2) which is selected with
user switch 01 bit 6 is used for all destinations
during broadcasting.
COMMENTS
COMMENTS
COMMENTS
4-20 SM