Ricoh A250 Service Manual page 552

Rev. 12/99
If the switch setting is wrong, or if the tool is
not connected correctly, the message on
the right appears. Then turn off the machine
and retry the procedure again.
6. Press OK, then check the ROM version.
If the card does not contain FCU ROM data,
"Please check flash card" appears. Turn off
the machine and retry the procedure with
the correct card.
7. Press Start.
After the machine updates the ROM data,
the message on the right appears.
8. Turn off the main power switch then
disconnect the flash memory card.
⇒
9. Turn SW1 off.
10. Turn the machine back on.
11. Print the system parameter list to check if the new ROM version is printed.
SM 6-7
FIRMWARE UPDATE
A891R523.TIF
A891R519.TIF
A891R525.TIF
A891R526.TIF
A250