Ricoh A250 Service Manual page 910

Rev. 7/2001
1. ROM HISTORY
1.1 FIRMWARE MODIFICATION HISTORY
B308 POSTSCRIPT OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Corrects the following:
•
The printer controller can now detect
whether it is installed in a A250 or B001
Corrects the following:
•
The PostScript Option firmware has been
modified so that it can also be used with
the A265/A267.
Corrects the following:
• The PostScript Option firmware was
modified so that it can also be used with
the B001.
Corrects the following:
•
The product names of the B001
PostScript drivers for NRG, Savin and
Infotec should be corrected as follows:
Incorrect
NRG D415s/2815s
/3215s PS3
SAVIN 9915DP PS3
Infotec PS3
⇒
Corrects the following:
•
Firmware modified so that the controller
can connect to and be used with the
DAZEL System. However, the
A265/A267 is not yet officially certified by
DAZEL Corp.
When you enable this function, it is
necessary to do the following:
-Upgrade the NIB firmware to version
4.0.6 or later and the PS3 firmware to
version 1.2.4 or later.
-Set NIC to bi-directional-mode (refer to
NIC manual).
-Do not set Bit SW3, bit 2 to 1 (as
explained above, these two SW should
not be simultaneously enabled).
* To deactivate the DAZEL support
function, set Bit SW3, bit 4 to 1
(0=Enabled, 1=Disabled).
SM
Correct
NRG D415s/2815S
/3215 PS3
SAVIN 2015DP PS3
Infotec 4150 MF PS3
1-1
FIRMWARE SERIAL
LEVEL NUMBER
B3085280 A Initial Production
B3085280 B October '99
Production
B3085280 C October '99
Production
B3085280 D
January '00
Production
B3085280 E November '00
Production
ROM HISTORY
FIRMWARE
VERSION
1.0.0
1.2.0
1.2.1
1.2.2
1.2.4
...Continued
B308