Ricoh A250 Service Manual page 647

Rev. 12/2000
Description of Modification
•
Even when the PJL command is released
instructing the machine to exit the paper to tray 2
(1-bin tray), the paper is not output from this tray.
•
With Overlay printing, the text outside the fixed
overlay pattern is printed out as PCL commands
(specifically, the ESC sequence).
•
The paper is not fed from Tray 2, even when the
PJL command is released instructing the machine
to do so.
•
Error message not displayed when an error
occurred during collate mode printing.
•
This new revision disabled the NIB Read/Write
Function.
•
The printed area was shifted slightly, when "Unit of
Measure" was defined using the macro command.
•
The right edge of the printable area for the raster
image may not print.
•
The right edge for the error Log of the
Configuration Page criss-crossed each other in
Italian and Spanish.
•
The title of "Printer Name (NetWare)" on the
Configuration Page was changed to "Printer
Name".
⇒
•
Part of the image is missing for the first two pages
when printing out with the Unico2000 CAD
application.
•
When printing out with the Microsoft Mini Driver for
Windows NT Terminal Server, the image created is
sometimes out of specification.
•
When printing out a file made with certain CAD
applications for DOS without using a printer driver,
thick lines on the original image appear thin on the
output.
** To activate this correction, it is necessary to set
Bit SW3, bit 3 to 1
(0=disabled, 1=Enabled).
•
Firmware modified to meet the functional
specifications of the Tray Priority function.
•
The print speed slows down during continuos
printing of a 1-page job.
** To activate this correction, it is necessary to set
Bit SW3, bit 2 to 1 (0=Disabled, 1=Enabled) and
set Bit SW3, bit 4 to 1 (DAZEL support function
disabled). The correction will not be effective if
both of these switches are enabled.
•
Firmware modified so that the controller can
connect to and be used with the DAZEL* System.
However, the A265/A267 is not yet officially
certified by DAZEL Corp.
When you enable this function, it is necessary to
do the following:
SM
Firmware
Level
B3055280 E
B3055280 F
B3055280 G
B3055280 H
6-7
ROM HISTORY
Serial Firmware
Number Version
March 2000 1.3.4
Production
April 2000 1.3.6
Production
Sept. 2000 1.4.0
Production
Nov. 2000 1.4.4
Production
Continued
A250