Ricoh A250 Service Manual page 709

Rev. 12/99
Mode No.
Class Class
1 and 2 3
Binding Hole Range
6-911*
Total Operation Time
7-001*
Total Original Counter
1
(All Modes)
Total Original Counter
7-002* 2
(Copier)
Total Original Counter
3
(Fax)
Total Print Counter
1
(All Modes)
Total Print Counter
2
⇒
(Copier)
7-003* Total Print Counter
3
(Fax)
Total Print Counter
4
(Printer)
Total Print Counter
5
(A3/DLT)
CE Counter Reset
7-004*
Copy Counter - Paper
1
Size (A3)
Copy Counter - Paper
2
Size (B4)
Copy Counter - Paper
3
Size (A4)
Copy Counter - Paper
4
Size (B5)
Copy Counter - Paper
7-101*
5
Size (DLT)
Copy Counter - Paper
6
Size (LG)
Copy Counter - Paper
7
Size (LT)
Copy Counter - Paper
8
Size (HLT)
Copy Counter - Paper
9
Size (Others)
Copy Counter - By-pass
1
(Special Paper)
7-102*
Copy Counter - By-pass
2
(Thick Paper)
Total Scan Counter
7-201*
SM
SERVICE PROGRAM MODE
Function
Adjusts the maximum binding hole
size for originals. If the original set
sensor in the ADF detects a gap
wider than this, it assumes that a
new page has just started to feed in.
Displays the total operation time
(total drum rotation time).
Displays the total number of
scanned originals (all modes).
Displays the total number of
scanned originals (copy mode only).
Displays the total number of
scanned originals (fax mode only).
Displays the total number of prints
(all modes).
Displays the total number of prints
(copier mode).
Displays the total number of prints
(fax mode).
Displays the total number of prints
(printer mode).
Displays the total number of prints
(A3/11" x 17" mode).
This SP is for Japan only. Do not
change the value.
Displays the total number of copies
by paper size.
Displays the total number of copies
made from the by-pass tray, by
paper type.
Displays the total number of
scanned originals.
4-33
Settings
0 ~ 20
1 mm/step
12 mm
A250