Ricoh A250 Service Manual page 197

Rev. 12/99
Mode No.
Class Class
1 and 2 3
NVRAM Data Upload
5-824
NVRAM Data Download
5-825
Program Upload
5-826
⇒
Program Download
5-827
Printer Free Run
5-901
Test Pattern Print
5-902
LCD Contrast
5-903* Adjustment
Auto Off Timer Setting
5-904*
CSS 25 Hours Off
5-905*
Detection
SM
SERVICE PROGRAM MODE
Function
Uploads SP and UP mode data
(except for counters and the serial
number) from the flash memory on
the BICU board to a flash memory
card.
This SP can be used when a flash
memory card is plugged into the
machine. See the "NVRAM Data
Upload" section for details.
Downloads SP mode data from a
flash memory card to the flash
memory on the BICU board.
This SP can be used when a flash
memory card is plugged into the
machine. See the "NVRAM Data
Download" section for details.
Uploads the system program from
the flash memory on the BICU board
to a flash memory card.
This SP can be used when a flash
memory card is plugged into the
machine. See the "Program Upload"
section for details.
Downloads the system program from
a flash memory card to the flash
memory on the BICU board.
This SP can be used when a flash
memory card is plugged into the
machine. See the "Program
Download" section for details.
Performs a printer free run.
After selecting "1", press "OK" or the
! key twice to start this feature.
Press the " (Clear/Stop) key to
stop.
Prints a test pattern.
See the "Test Pattern Printing"
section for how to print a test
pattern.
Change to the copy mode display by
pressing the # (Interrupt) key,
then print out the test pattern.
Adjusts the contrast of the LCD on
the operation panel.
Adjusts the auto off mode timer.
If this value is changed, the user tool
setting is also changed.
This SP is for Japan only. Do not
change the value.
4-29
Settings
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0 ~ 7
1 /step
3
1 ~ 240
1 min/step
30 min
A250