Ricoh A250 Service Manual page 497

Printer Switch 06
No FUNCTION
0 Printing while a paper
cassette is pulled out, when
the Just Size Printing feature
is enabled.
0: Printing will not start
1: Printing will start if another
cassette has a suitable size of
paper, based on the paper
size selection priority tables.
1-7 Not used.
Printer Switch 07
No FUNCTION
0 Reduction for Journal printing
0: Off
1: On
2-3 Not used.
4 List of destinations in the
Communication Failure
Report for broadcasting
0: All destinations
1: Only destinations where
communication failure
occurred
5-7 Not used.
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0D - Not used (do not change the settings)
Printer Switch 0E
No FUNCTION
0 Paper size selection priority
0: Width
1: Length
1
Paper size selected for
printing A4 width fax data
0: 8 x 11" size
1: A4 size
SM
COMMENTS
Refer to Just Size Printing in section 2 for details.
Cross reference
Just size printing on/off – User switch 05, bit 5
Do not change the settings.
COMMENTS
1: The Journal is reduced to 91% to ensure that
there is enough to space in the left margin for
hole punches or staples.
Do not change the settings.
1: Only destinations where communication failure
occurred are printed on the Communication
Failure Report.
Do not change the settings.
COMMENTS
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to print all
the received lines without reduction is selected first.
This switch determines which paper size is
selected for printing A4 width fax data, when the
machine has both A4 and 8" x 11" size paper.
4-35
BIT SWITCHES
A250