ROM HISTORY
B308 POSTSCRIPT OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
⇒
Continued...
•
The print speed slows down during
continuos printing of a 1-page job.
** To activate this correction, it is
necessary to set Bit SW3, bit 2 to 1
(0=Disabled, 1=Enabled) and set Bit
SW3, bit 4 to 1 (DAZEL* support function
disabled). The correction will not be
effective if both of these switches are
enabled.
Corrects the following:
•
During RAM collate printing, the job
cannot be cancelled.
•
When the job is cancelled, the output
paper count is sent to the printer
controller (a side-effect of the previous
modification made for DAZEL
connection).
FIRMWARE
LEVEL
B3085280 F
January '01
Production
1-2
Rev. 7/2001
SERIAL
FIRMWARE
NUMBER
VERSION
1.2.6