Ricoh A250 Service Manual page 222

SERVICE PROGRAM MODE
NVRAM Data Upload (SP5-824)
1. Turn off the main switch.
2. Remove the cover [A] (1 rivet).
3. Plug the flash memory card [B] into
the card slot.
NOTE: Make sure that the surface
printed "A" faces the left
side of the machine (as
viewed from the front of the
machine).
4. Turn on the main switch.
5. Access SP mode 5-824.
6. The machine erases the current
settings, then writes the machine's
settings to the flash memory card.
This takes about 60 seconds. If
uploading failed, an error message
appears (see "Program Download"). At this time, repeat the upload procedure.
A250
[A]
[B]
4-54
A250M211.WMF
SM