Power Supply Unit Removal - Ricoh FT5580 Service Manual

12 June 1987
OTHERS

1. Power Supply Unit Removal

1. Turn off the main switch.
2. Open the front cover, and remove the left inner cover (4 screws).
Then, disconnect the 2P white connector [A] from the power supply
unit.
3. Remove the rear cover (2 screws) and the main board [B] (2 screws,
leave connectors inserted).
[C] from the power supply unit.
4. Pull out the transport handle [D] and remove the exit roller cover [E]
(2 screws).
to damage any connectors.)
Then, remove the power supply unit [F]. (Be careful not
3-66
Then, remove the 16P white connector