Ricoh A250 Service Manual page 461

17 May, 1999
3.4 HANDSET (USA MODELS ONLY)
[E]
1. Attach the bracket [A] (3 screws) to the left cover.
2. Remove the label [B] from the handset cradle [C]. Attach the cradle to the
bracket [A] (2 screws), then replace the label [B].
3. Install the handset [D], then connect the cable to the "TEL1" or "TEL2" jack [E]
at the rear of the machine, as shown.
4. Hook the curled cord onto the bracket as shown [F].
HANDSET (USA MODELS ONLY)
A891II540.WMF
[F]
A891I541.WMF
3-15
[C]
[B]
[A]
[D]