Ricoh A250 Service Manual page 766

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – 3218
RICOH – AFICIO 180
SAVIN – 9918DP
SUBJECT: FUSER UNIT
GENERAL:
To prevent the scraping / deformation of the Pressure Release Lever tip, the following part has changed.
The following part corrections are being issued for all A250 Parts Catalogs.
OLD PART NO. NEW PART NO.
A2504017
A2504027
UNITS AFFECTED:
All A250 copiers manufactured after the Serial Numbers listed below will have the new style Fusing Unit
installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
   
2000 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
A250/B001 - 024
A2504018 Fusing Unit – 120V
A2504028 Fusing Unit – 220V
MODEL NAME
Gestetner 3218
Ricoh Aficio 180
Savin 9918DP
DESCRIPTION
SERIAL NUMBER
H1791000001
H1791000296
H1791000001
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
05/15/2000
REFERENCE
QTY INT PAGE ITEM
1 0 21
1 0 21
CONTROL NO. 034ABW
1
1