Ricoh A250 Service Manual page 496

BIT SWITCHES
4 Page separation threshold (with reduction disabled with switch 03-0 above)
to
7
If the incoming page is up to x mm longer than the length of copy paper, the
excess portion will not be printed. If the incoming page is more than x mm longer
than the length of copy paper, the excess portion will be printed on the next page.
The value of x is determined by these four bits.
Hex value of bits 4 to 7
and so on until
Default setting: 6 mm
Cross reference
Page separation and data reduction: section 2
Length reduction On/Off: Printer Switch 03, Bit 0
Printer Switch 04
No FUNCTION
0 Maximum reducible length when length reduction is enabled with switch 03-0
to above.
4 <Maximum reducible length> = <Paper length> + (N x 5mm)
'N' is the decimal value of the binary setting of bits 0 to 4.
Bit 4 3
0 0
0 0
0 0
1 1
For A5 sideways and B5 sideways paper
<Maximum reducible length> = <Paper length> + 0.75 x (N x 5mm)
5 Length of the duplicated image on the next page, when page separation has taken
6 place.
  
0 1
  =    
4 mm,
  
0 0
7 Not used.
Printer Switch 05 - Not used (do not change the settings)
A250
x (mm)
0 0
1 1
F 15
2 1 0 Setting
0 0 0 0 mm
0 0 1 5 mm
1 0 0 20 mm (default setting)
1 1 1 155 mm
  
0
=     =  
10 mm, 15 mm,
  
1
Do not change the setting.
COMMENTS
 
1
  =  
Not used
 
1
4-34 SM